VR43
Vandal and Weather Resistant Keypad.
N761
i
TABLE OF CONTENTS PAGE
Features .................................................................................... 1
Package Contents.................................................................... 1
Specifications........................................................................... 2
Dimensions............................................................................... 2
Wires.......................................................................................... 3
Installation................................................................................ 4
Using the VR43 keypads with Presco™............................... 5
VR43 to PAC1/PAC2 wiring diagram..................................6
VR43 to KC2, KC6 & PDA wiring diagram.........................6
Using the VR43 keypads with Weigand ............................... 7
VR43 to Weigand wiring diagram.......................................7
Options...................................................................................... 8
General Options...................................................................8
Weigand Options.................................................................9
Presco™ Options...............................................................11
Setting the options via the VR43 keypad.........................12
Warranty.................................................................................. 13
Other Products....................................................................... 13
1
FEATURES
• Suitable for indoor and outdoor usage.
• Durable and stylish metal keypad construction (satin chrome
plated zinc die cast).
• 5 to 14 Volt D.C. operation.
• Vandal Resistant.
• Weather Resistant (IP67).
• Outputs Presco™ and Weigand data.
• Backlighting on keys standard.
• Compatible with all Nidac Presco decoders.
• Fully configurable for custom Weigand modes.
• Operating temperature range of -20ºC to 70ºC.
• 36 month (3 year) manufacturers warranty.
PACKAGE CONTENTS
Included in the package for your VR43 keypad is:
1 x VR43 keypad.
1 x Installation manual (this document).
1 x VR43 keypad cable with rubber sealing boot.
1 x Hex Allen key to remove screw for fascia.
1 x Mounting template.
If any of these items are missing please contact your supplier.
2
SPECIFICATIONS
Voltage: 4.9V to 14.5V D.C.
Current: 40mA max @ 12V D.C. (without backlighting)
Backlighting: 25mA @ 12V D.C.
Dimensions: 132mm x 92mm x 20mm (H x W x D).
Weight: 780 grams (including cable).
Ingress Protection Rating: IP67
DIMENSIONS
To Next Page
Need help?
General
