EasyManua.ls Logo

Nidec MCE iBox - Page 244

Nidec MCE iBox
482 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
6-40 Manual # 42-02-7223 C1
Fire Service Recall Alternate, Fire Recall Alternate, Fire Recall Alt.
Description: Fire recall to the alternate fire floor has been initiated.
Car Reaction: Car proceeds to user-defined alternate fire recall floor. Once at recall floor, door operation is
according to the user-defined door operation under fire recall operation.
Tro ubleshooting:
1. If in error, inspect the fire sensor and switch inputs and connections.
2. Related Inputs: Smoke sensors and fire recall switches as indicated on the job prints.
Fire Service Recall Main, Fire Recall Main, Fire Recall Main
Description: Fire recall to the main fire floor has been initiated.
Car Reaction: Car proceeds to the user-defined main fire recall floor. Once at the recall floor, door operation
is according to the user-defined door operation under fire recall operation.
Tro ubleshooting:
1. If in error, inspect the fire sensor and switch inputs and connections.
2. Related Inputs: Smoke sensors and fire recall switches as indicated on the job prints.
Fire Service Recall Deactivated
Description: Fire service recall operation has been deactivated.
Car Reaction: Car returns to its prevailing mode of operation.
Tro ubleshooting: NA
Flood Operation Activated, FLOOD OPERATION
Description: Flood operation has been activated via system command or hardware switch.
Car Reaction: A car in the flood zone area moves immediately to a floor outside the flood zone. The car will
no longer service the floors in the flood zone until Flood Operation is deactivated.
Troubleshooting: Check the flood zone switch and the user interface command.
Flood Operation Deactivated
Description: Flood operation has been deactivated.
Car Reaction: The car will service all eligible floors.
Floor Heat Detectors Activated, FLOOR HEAT DETECTORS
Description: One or more floor heat detector inputs are activated. The fire warning light will flash until all
heat detectors have been reset. The fire-warning buzzer will sound until the car is shutdown at a floor.
Car Reaction: A car that is parked at a floor will open its doors and shut down. A car in motion will proceed in
the current direction to the next available floor where the heat detector is not tripped. If all heat detectors in
the current direction are tripped, the car will reverse direction and proceed to the first floor where the heat
detector is not tripped. If again all heat detectors are tripped, the car will proceed to the main fire recall floor
unless the car is also on Fire Service, in which case the car will proceed to the appropriate fire recall floor.
Once the car is stopped at a floor it will automatically open its doors and shut down. Then, if the machine
room or hoistway heat detectors are active, a signal is provided to disconnect the main power line and/or
activate the sprinklers where available.
Floor Heat Detectors Deactivated
Description: All floor heat detector inputs are deactivated.
Car Reaction: The car is allowed to run.
Table 6.3 iControl Messages
iControl Messages

Table of Contents

Related product manuals