To Next PageTo Next Page
Need help?Do you have a question about the Nidec MCE iBox and is the answer not in the manual?
General| Brand | Nidec |
|---|---|
| Model | MCE iBox |
| Category | Control Systems |
| Language | English |
Covers AC supply verification, wiring details, and connections to the controller and transformer.
Covers checking the hoist motor, wiring it to the controller, and verifying brake resistance.
Details wiring for emergency stop, hoistway switches, and cartop safety relay bypass.
Covers connecting the iView PC, verifying parameter settings, and learning safety configuration.
Ensures the controller is set to match the job safety configuration before operation.
Provides instructions for checking voltage, polarity, and calibrating drive parameters.
Describes automated and manual procedures to calibrate the system 12 drive analog circuitry.
Covers checking default values, calibrating the motor field, and checking calibration results.
Describes brake calibration for DC systems using the iField Module advanced braking system.
Verifies proper car movement and motor current, troubleshoots issues, and calibrates speed.
Sets the allowed margin of deviation from commanded speed for fault detection.
Provides startup instructions for Quattro DC Drive, covering parameters and configurations.
Describes final adjustments and complete final inspection of the elevator system.
Procedure to successfully complete before running the elevator on Test or Normal operation.
Performs adjustments and tests for safety functions, including Tach Error adjustment.
Provides highly automated safety testing procedures for elevator components.
Checks that no safety functions or circuits remain bypassed before normal passenger use.
Procedure for installing updated iControl operating software, including bootrom and IMP programs.
