6
Model NVS-07
Power AC230V
～
/50Hz
Motor capacity 750 W
Vacuum pump 250 W
Ambient temperature +10ºC to 40ºC
Ambient humidity 85% or less (no condensation)
Altitude 1000 m or less
External dimensions 1
200 mm (including the supporting plate) x 420 mm x 890 mm
Weight 140 kg
Diameter of the extruding slot Φ90 mm
Supply of clay appox. 25 kg
Extruding capacity 330 kg/h (pugging only)
English
Specication
Parts List
Vacuum gauge
Vacuum pressure relief valve
Limit switch sensor
Switch panel
Hopper case
Indicator
Caster
Power cord
Shows that electric current ows into the motor.
Filter
Hopper cover
Vacuum chamber
Nozzle (with extruding slot)
Clay cutter
Clay roller shelf
Nozzle cover
Exhaust outlet
Hopper inlet
Auger screw
Air inlet
Switch panel
Power switch
(breaker)
Selector switch
Screw speed control
Vacuum pump switch
Do not touch with wet hand.
Cause electric shock and
breakdown.
MOVING PARTS
Can cause serious injury.
Keep hands clear.
ELECTRIC HAZARD
Disconnect power before
servicing.
To Next Page
Loading...