To Next PageTo Next Page
Need help?Do you have a question about the Nidec Shimpo VL-Whisper and is the answer not in the manual?
General| Type | Pottery Wheel |
|---|---|
| Series | VL-Whisper |
| Manufacturer | Nidec Shimpo |
| Speed Range | 0-250 RPM |
| Wheel Head Speed | 0-250 RPM |
| Wheel Head Direction | Reversible |
| Gear Type | Direct Drive |
| Efficiency | High |
| Noise Level | Whisper Quiet |
| Backlash | Minimal |
| Voltage | 115V/230V |
| Wheel Head Diameter | 14 in (35 cm) |
Specifies what the product is designed for and what not to use it for.
Restricts items placed on the wheelhead and suggests workspace usage.
Warns against user repair or modification, noting risks of electrocution or injury.
Advises against inserting objects into moving parts to prevent injury.
Warns about leaving children unattended near the wheel due to potential injury.
Emphasizes keeping tools and small parts away from children to prevent injury.
Warns that the product may be harmful to individuals with pacemakers, potentially causing serious injury or death.
Instructs to stop operation, unplug, and contact dealer if smoke, fire, or unusual noises occur.
Stresses caution when moving or lifting the 93lb wheel to prevent serious injury.
Warns against handling electrical outlets with wet hands to prevent electrocution.
Warns against touching the wheelhead while it's turning to avoid entanglement.
Advises caution with loose clothing and long hair to prevent entanglement in the wheel.
Warns against lifting the wheel by the wheelhead to prevent damage or injury.
Caution regarding jewelry and long nails getting caught, causing damage or injury.
Recommends placing the wheel on a flat, horizontal surface to prevent vibration.
Instructs not to remove ball mill rack bolts unless installing the rack to prevent water damage.
Warns against removing the bottom cover, which protects internal electrical parts.
Advises against placing TVs, radios, or antennas near the wheel to avoid noise and distortion.
Provides step-by-step instructions for attaching the legs and adjusting height.
Details the five different height adjustment positions available by changing bolt locations.
Guides on how to insert and snap together the two splash pan halves.
Outlines the steps to turn on the power, set direction, and adjust speed with the foot pedal.
Details how to stop the wheelhead using the foot pedal and turn off the power.
Explains how to safely change the wheelhead direction by stopping the pedal first.
Emphasizes placing the foot pedal in the stop position before turning off the power.
Warns against operating switches or plugs with wet hands due to electrical shock risk.
Advises on safe cleaning methods, warning against hosing down the wheel.
Explains how to adjust the foot pedal stopper bolt for accurate 'stop' and 'full speed' positions.
Details the dual functions of the power switch: on/off and reset for over-load safety.
Lists common causes and checks for when the wheelhead fails to turn.
Provides checks for unusual sounds, including surface level, clay balance, and leg tightness.
Addresses issues where the wheelhead stops turning, often due to overload or breaker trips.
Explains how to correct the wheelhead turning in the opposite direction.
Guides on troubleshooting if the wheelhead does not turn after pedal replacement.
Details the warranty period and conditions for defects in workmanship and material.
States that the express warranty is exclusive and disclaims all other implied warranties.
Outlines the buyer's sole obligation and Shimpo's options for warranty service.
Covers buyer's liability for claims and limitations on damages arising from product use.
Defines the contract as the entire agreement, superseding any seller's representative statements.
Provides essential precautions for cleaning, inspection, and general upkeep of the wheel.
Highlights risks associated with electrical circuits, tampering, and contacting technicians.
Advises on adult supervision and caution when children are using or near the equipment.
Includes advice on removing accessories, not lifting by the wheelhead, and unplugging when unused.
Instructs to contact a dealer for power cord replacement and not to attempt self-repair.
