To Next PageTo Next Page
Need help?Do you have a question about the Nieaf-Smitt EazyVolt Pro LED and is the answer not in the manual?
General| Continuity Test | Yes |
|---|---|
| Polarity Indication | Yes |
| Single-Pole Phase Test | Yes |
| Two-Pole Phase Rotation Test | Yes |
| Display | LED |
| Protection Class | IP65 |
| Overvoltage Category | CAT IV 600 V |
| Frequency Range | 0 Hz - 400 Hz |
Instructions for safe operation, warnings, and potential dangers.
Explanation of symbols used on the tester and in the manual.
Overview of the Nieaf-Smitt EazyVolt Pro voltage testers.
Identification of physical components of the EazyVolt Pro LED model.
Description of indicators and readouts on the EazyVolt Pro LED display.
Identification of physical components of the EazyVolt Pro LCD model.
Description of indicators and readouts on the EazyVolt Pro LCD display.
Covers auto power on/off and initial setup for testing.
Details AC/DC voltage, low voltage, and interference suppression tests.
Procedures for performing continuity and diode tests.
Explains resistance, single-pole phase, and phase rotation tests.
Describes RCD test, torch light function, and frequency measurement.
Covers self-test, NCV, HOLD, and backlight features.
Instructions for replacing the tester's batteries.
Guidelines for cleaning and storing the tester.
Information on required maintenance for the tester.
Details on product warranty and service.
Technical details and performance characteristics of the LED model.
Technical details and performance characteristics of the LCD model.
