Need help?Do you have a question about the Nietz NZE Series and is the answer not in the manual?
Verify inverter and accessories upon receipt, checking for damage or missing items.
Guidelines for safe handling during transport and proper installation procedures.
Instructions on safe wiring practices to prevent electrical shock and damage.
Safe procedures for initial power-up and testing of the inverter.
Safety measures to follow during inspection and maintenance activities.
Details on how to perform an emergency stop for safety.
Conditions and requirements for the inverter's installation environment.
Diagram and explanation for connecting the main power circuit of the inverter.
Overview of control circuit terminals, including diagrams and wiring instructions.
Description of the inverter's operation panel, including keys and displays.
Guidance on identifying and correcting common fault codes and their causes.
Steps for diagnosing issues when the cause of a problem is not immediately clear.
General| Output Frequency | 0-400Hz |
|---|---|
| Control Mode | V/F control, Sensorless vector control |
| Storage Temperature | -20°C to +60°C |
| Overload Capacity | 150% for 60 seconds |
| Braking Unit | Built-in |
| Communication | Modbus RTU |
| Protection Features | Overvoltage, Undervoltage, Overcurrent, Overload, Overtemperature, Short Circuit |
| Operating Temperature | -10°C to +50°C |
| Ambient Humidity | 5-95% (non-condensing) |
| Input Voltage | 3-phase 380-480V AC |
| Cooling Method | Forced air cooling |
| Altitude | Below 1000m (Derating may be required above 1000m) |
To Next Page
