To Next PageTo Next Page
Need help?Do you have a question about the NIFTYLIFT SD210 Series and is the answer not in the manual?
Provides an overview of the manual's purpose, importance, and definitions of safety terms.
Defines the manual's coverage for the Niftylift SD210 4x4x4 (SD64 4x4x4) diesel model.
Introduces the SD series, company contact details, and the SD210 4x4x4's capabilities.
Lists detailed technical specifications for the Niftylift SD210 4x4x4 model, including dimensions and capacity.
Details the information found on the UK manufacturer's identification plate.
Details the information found on the USA manufacturer's identification plate.
Presents a typical EC Declaration of Conformity for the machine.
Outlines essential safety rules and precautions for operating the Niftylift.
Specifies operational temperature, dust, and wind speed limitations for the machine.
Details the noise emission levels and vibration exposure for operators.
Describes the comprehensive type testing and individual machine testing procedures.
Instructions for safely unpacking the Niftylift and ensuring pre-operational checks.
Mandatory systematic inspection procedure before putting the aerial platform into service.
Daily and weekly safety checks required before operating the aerial platform.
Monthly maintenance checks for the Niftylift, including oil levels, nuts, and brakes.
Annual maintenance checks covering pivot pins, chassis, hydraulic oil, and slew ringbolts.
Lists part numbers and quantities for placards, decals, and installation.
Details various components within the Niftylift's control circuit, including alarms and valves.
Provides step-by-step instructions for safely deploying outriggers and levelling the machine.
Instructions for operating the Niftylift from the ground, including engine start and controls.
Instructions for operating the Niftylift from the platform, including boom functions and controls.
Explains how to use the driving controls, steering, and speed selection for the Niftylift.
Details the procedure for deploying and setting up the machine's stabilisers for safe operation.
Explains the function, testing, calibration, and maintenance of the cage weigh system.
Covers procedures for transporting, towing, craneage, storage, and setting the machine to work.
Emphasizes checking emergency controls daily and operator familiarity with their function.
Procedure for safely bringing the machine to the ground if the operator becomes incapacitated.
Describes how to lower the platform using emergency hand pumps during machine failure.
Instructions for operating booms using the hand pump during an emergency.
Procedure for operating rear steer using the hand pump in an emergency.
Instructions for operating front steer using the hand pump in an emergency.
Procedure for releasing parking brakes for towing the machine.
Procedure for manually recovering stabilisers in the event of power loss.
Mandatory requirement to report any accident or incident involving the Niftylift.
Seller's responsibility to notify Niftylift of ownership changes for technical bulletins.
Requirement to read and understand responsibilities before operating the aerial platform.
Checklist for pre-hire inspection, service, and maintenance of the Niftylift.
General| Brand | NIFTYLIFT |
|---|---|
| Model | SD210 Series |
| Category | Lifting Systems |
| Language | English |
