Need help?Do you have a question about the Night Owl BTD2 Series and is the answer not in the manual?
General| Model | BTD2 Series |
|---|---|
| Category | Measuring Instruments |
| Frame Rate | 9Hz |
| Spectral Range | 8-14μm |
| Storage Temperature | -20°C to 60°C |
Covers power, environment, handling, and ventilation for the recorder.
Warns about severe electrical shock if the recorder cover is removed.
Guides on downloading and creating an account for the Night Owl Protect App.
Details steps for app download, account creation, and email verification.
Guides on connecting the hardware for BTD2/BTD8 Series recorders.
Details connecting Ethernet cable, camera cables, and power splitter.
Guides on connecting the hardware for BTWN8 Series recorders.
Details connecting antennas, Ethernet, and power for the BTWN8 Series.
Introduces system configuration using the Night Owl Protect App and Bluetooth.
Describes the preferred setup method using the app without a TV/monitor.
Guides on signing into the app and enabling Bluetooth access.
Details the app pairing process and firmware check/update.
Provides tips on distance, obstacles, and interference for camera placement.
Step-by-step instructions for physically mounting the cameras.
Introduces the playback menu for searching and replaying recordings.
Explains how to filter recordings by date and channel.
Describes playback controls, event filters, and timeline navigation.
Guides on selecting and exporting individual events or recordings.
Details where to save exported recordings and available options.
How to check for new firmware and perform manual upgrades.
Steps for installing firmware after finding or downloading it.
Adjusting channel names, recording, spotlight, and voice alerts, plus copying settings.
Setting recording to Event Based or Continuous.
Initiating a health check for cameras and the recorder.
Interpreting results for camera status, signal, MIC, speaker, and system connections.
Understanding hard drive, Ethernet, LAN/Server, USB, and Bluetooth status.
Restoring recorder settings to default values, deleting recordings.
Restoring the recorder to factory defaults, removing app configurations.
Steps to reset the password using the Night Owl Protect App.
Instructions for resetting the password through the Night Owl Web Portal.
Steps to reset a local password when the recorder is not connected to the internet.
To Next Page
