EasyManua.ls Logo

Night Vision NOXM50 User Manual

Night Vision NOXM50
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNERS
MANUAL
NIGHT SCOPE
Monocular
Models NOXM50/NOXM42
CAUTION: Do not point Infrared Emitter directly into eye at close range.
Keep out of reach of children.
The infrared emitter emits a BRIGHT, although invisible, beam of light.
As with any bright light, do not point into the eye.
1465-H Henry Brennan
El Paso, Texas 79936
1-800-444-5994
www.nightowloptics.com
Made in Russia
MNOXM42/50 Rev.2 072613
Please Read
Excessive exposure to bright light, with power on, will destroy
internal Image Intensifier Tube.
Night V
ision device is designed for nighttime use only
.
Not for use in daylight conditions nor in lighted environments.
Keep lens cap on device
when not in use to protect internal
Image Intensifier Tube
.
CUSTOMER SERVICE
If you have any questions or problems with your device, you may visit our website at
www.nightowloptics.com where you will find answers to the most frequently asked questions.
If you experience any problems with your device, or if your device is in need of service, please call our
customer support number 1.800.444.5994. The hours of operation are 8:00 a.m.-5:00 p.m. MST,
Monday to Friday.
LIMITED ONE YEAR WARRANTY
Congratulations on the purchase of your new Night Vision device. This certifies that the Warrantor
warrants this product to be free of defects in material and workmanship when used in accordance with
the accompanying owner’s manual. Warrantor’s obligation under this Warranty shall be limited to the
original purchaser to repair or replace, free of charge, within the specified period of Warranty. This
Warranty is not transferable.
This Warranty does not apply to any Night Vision products that have been subject to indirect damage due
to misuse, abuse, accident, and alteration due to the attempt to repair a unit by a non-authorized repair
agent. This Warranty does not cover damage to the intensifier tube due to using the unit in the daytime or
in a lighted area. Please see owner’s manual for the proper conditions of use.
During the Warranty period, Warrantor and/or any of its affiliates or authorized repair agents will, at their
discretion, repair or replace defective parts in the warranted products free of charge.
Proof of purchase is required to make a claim under this warranty.
PROCEDURE FOR WARRANTY CLAIM
Please contact a Night Vision Customer Service Representative by mail or telephone for return
authorization.
Warrantor will not accept any returns unless they contain a return authorization number issued by a Night
Vision optics Customer Service Representative.
Should you be interested in returning your device for service, please include with your device its original
carrying case, manual, adapters, and carrying straps. Also, please pack the unit with enough protective
material so it does not get damaged or scratched during shipment. Please include your name, shipping
address, telephone number, along with proof of purchase and a brief note describing the defect. The unit
will be repaired or replaced at the discretion of the Warrantor. In the event the repairs are not covered by
this Warranty, an estimate will be sent for your approval. Please know that non-Warranty repair or
refurbishing of your device is always provided at a reasonable cost.
NOTE TO CUSTOMERS OUTSIDE THE U.S.
This warranty may vary in other countries, check with your distributor for details.
Factory warranty follows the channel of distribution.
Warranty does not cover shipping costs
Copyright©2013
NONexGenII-monocularPRINTER.qx6 7/26/13 9:56 AM Page 1
Question and Answer IconNeed help?

Do you have a question about the Night Vision NOXM50 and is the answer not in the manual?

Night Vision NOXM50 Specifications

General IconGeneral
Magnification5x
Objective Lens Diameter50mm
Eye Relief15mm
Battery TypeCR123A
Weight600g

Summary

LIMITED ONE YEAR WARRANTY

PROCEDURE FOR WARRANTY CLAIM

Details the steps for returning a device for warranty service, including authorization and required documentation.

Quick Start

HOW TO FOCUS YOUR NIGHT VISION DEVICE

Guides users on focusing the night vision device in both lighted and dark environments.

How to Care for your Night Vision Device

Product Specifications

How Night Vision Works

Image Quality

Typical Image Appearance

Frequently Asked Questions

Performance under Various Light Conditions

Complete Darkness

Details how the device performs in total darkness, requiring IR illumination.

Half-Moon

Explains performance with minimal natural light, such as during a half-moon phase.

Starlight

Describes performance under starlight, the lowest natural light condition.

Urban Environment

Covers performance in environments with man-made light sources like streetlights.

Troubleshooting

Focus Problems

Provides solutions for issues related to achieving a clear focus.

Unit does not turn on

Addresses issues where the device fails to power on or illuminate.

Image is too dark

Offers solutions for when the projected image appears too dim.

Projected image is dim

Suggests checks for a dim projected image, often related to battery status.