To Next PageTo Next Page
Need help?Do you have a question about the Nighthawk KN-COPP-3 and is the answer not in the manual?
Details the unique features of the Nighthawk alarm, including its digital display.
Covers digital display, test/reset, peak level memory, sensor, sounder, adapter, and battery backup.
Provides guidance on optimal placement for the CO alarm.
Lists locations to avoid to prevent nuisance alarms or damage.
Covers direct plug, wall mounted, and table top installation methods.
Explains how the alarm operates under normal AC and battery backup conditions.
Provides instructions for testing the alarm's electronics and sensor response.
Details malfunction signals, low battery warnings, and troubleshooting uncertainities.
Maintenance steps including cleaning and avoiding certain substances.
Explains the peak level memory feature and how to reset it.
Defines carbon monoxide (CO) as a poisonous gas from fuel combustion.
Explains how CO affects the body, causing oxygen deprivation.
Lists common household sources of carbon monoxide.
Provides tips on preventing CO poisoning and ensuring safety.
Offers recommended actions, unsafe practices, and warning signs for CO safety.
Defines dangerous, high, mid, and low CO levels and identifies high-risk individuals.
Details the physiological effects of CO exposure at different levels.
Lists mild, medium, and extreme symptoms of CO poisoning.
Guidance for handling low CO readings and potential sources.
Medical response and treatment procedures for CO poisoning victims.
Discusses challenges in identifying CO sources and the need for technicians.
Lists technical details like power, sensor, mounting, and alarm specifications.
Explains how the alarm uses technology to monitor CO levels.
Details the calibration and tolerances of the digital display readings.
Addresses the number of alarms needed and coverage area.
Explains time-weighted alarms, testing, and power outage behavior.
Discusses alarm signals for malfunctions, low battery, and error codes.
Explains display readings during start-up and normal operation.
Details readings for AC power, malfunctions, low battery, and no display.
Instructions for registering the five-year factory warranty.
Guidance on how to obtain warranty service or exchange.
General| Sensor Type | Electrochemical |
|---|---|
| Alarm Loudness | 85 dB at 10 feet |
| Peak Level Memory | Yes |
| Test/Reset Button | Yes |
| Operating Humidity | 10% to 95% non-condensing |
| Display | Digital |
| Certifications | UL 2034 |
