5 www.nightwatchersecurity.co.uk
Please contact 0845 900 6764 for further assistance.
OPERATION
1. Turn on the wall switch to activate the light, the light is now under Night-time mode
NOTE: Allow approximately 30 seconds warm-up time before the sensor resumes normal activity.
2. To test, walk through the sensor’s detection area.
3. After the light is activated, keep out of detection area and the light will switch off automatically after 3 minutes. The
light will be activated again when detecting any movement.
If there is continuing movement in the detection zone, the light will stay on until movement ceases. (after 3 minutes)
NOTE: THE INTELLIGENT MOTION SENSOR TRACKING LIGHT IS DESIGNED TO ILLUMINATE WHEN THE
DETECTION AREA IS ENTERED BY A PERSON AND WILL DETECT MOVING HEAT SOURCE. THERE IS NO
GUARANTEE IMPLIED THAT IT WILL PROVIDE TOTAL SECURITY OR PREVENT ILLEGAL ENTRY.
SPECIFICATION
Detection method: Passive Infrared Sensor (with continuous detect function)
Sensor range: 10m x 210° (maximum)
Power source: AC 240V 50Hz
Time adjustment: Fixed at 3 minutes approx.
To Previous Page
Loading...