Need help?Do you have a question about the Nikken PiMag Aqua Pour deluxe and is the answer not in the manual?
General| pH level | 8.5 - 9.5 |
|---|---|
| Material | BPA-free plastic |
| Filtration Technology | PiMag Technology, Activated Carbon Filtration |
| Filter Media | carbon |
| Weight | 0.91 kg (2 lbs) |
Troubleshooting a problem where water fails to enter the supply tank.
Addresses issues with a discolored microsponge filter, often due to dirt.
Resolving unpleasant tastes or odors in the filtered water, indicating filter issues.
Instructions for preparing and rinsing the filter cartridge before installation.
Steps for washing tanks and assembling the base unit with the float assembly.
Guidance on rinsing mineral stones and placing the water tank cover.
Procedure for screwing the filter cartridge into the adapter and placing the fill tank.
Instructions for rinsing and installing the prefilter and filling the tank with water.
Guidance on flushing out the first tankful of water to remove potential bitterness.
Information on using the ceramic filter as an alternative to the microsponge prefilter.
Guidelines for cleaning and maintaining the water system, avoiding direct sunlight.
Information on when to replace the microsponge filter and filter cartridge.
Details on how to order replacement parts like filters and mineral stones.
A section to log replacement dates for components and their recommended intervals.
To Next Page
