Nikon 1 AW1 - Page 116

91
t
1
Display exposure compensation options.
2
Choose a value.
Normal exposure can be restored by setting exposure compen-
sation to ±0. If P, S, A, or 4 (underwater; 5, 6) is selected in cre-
ative mode, exposure compensation will not be reset when the
camera is turned off.
Press 2 (E) to display exposure com-
pensation options.
Use the multi selector to choose from
values between –3 EV (underexpo-
sure) and +3 EV (overexposure) in
increments of
1
/ 3 EV. In general, posi-
tive values make the image brighter
while negative values make it darker.
A
Exposure Compensation
Exposure compensation is most effective when used with center-
weighted or spot metering (0 160).
A
The Built-in Flash
When used with the built-in flash, exposure compensation affects both
background exposure and flash level.