Need help?Do you have a question about the Nikon AF-S DX Zoom Nikkor 18-135/3.5-5.6G ED and is the answer not in the manual?
General| Focal Length | 18-135mm |
|---|---|
| Maximum Aperture | f/3.5-5.6 |
| Lens Mount | Nikon F |
| Image Stabilization | No |
| Filter Size | 67mm |
| Minimum Aperture | f/22-38 |
| Angle of View | 76° - 12° |
| Maximum Magnification | 0.2x |
| Diaphragm Blades | 7 |
| Autofocus | Yes |
| Format Compatibility | DX (APS-C) |
| Minimum Focus Distance | 0.45m (1.48 ft) |
| Dimensions (Diameter x Length) | 73.5 x 86.5mm (2.9 x 3.4 in) |
| Elements/Groups | 15 elements in 13 groups |
Details on setting up the oscilloscope, checking waveforms, and troubleshooting for GMR output.
Details adjustments for MR duty, driving frequency, and motor control for the main PCB.
Lists required equipment like power supply, oscilloscope, communication box, and adapter.
Steps involving power supply, software selection, and focus ring rotation for MR duty adjustment.
Driving the lens and checking the number of pulses from the MR encoder.
Checking overrun/underrun pulses per specified lens driving.
Checking servo time using an oscilloscope when driving the lens.
Details necessary MR duty adjustments when replacing main PCB, SWM unit, etc.
Steps to write aberration compensation data using the camera, software, and test charts.
To Next Page