140
J
2 Select a mode.
Highlight HDR mode and press 2.
Highlight one of the following and press J.
• To take a series of HDR photographs, select
6 On (series).
HDR shooting will
continue until you select Off for HDR
mode.
• To take one HDR photograph, select On
(single photo).
Normal shooting will resume automatically after you have
created a single HDR photograph.
• To exit without creating additional HDR photographs, select Off.
If On (series) or On (single photo) is selected, a k icon
will be displayed in the control panel.
3 Choose the exposure differential.
To choose the difference in exposure
between the two shots, highlight Exposure
differential and press 2.
The options shown at right will be
displayed.
Highlight an option and press J.
Choose higher values for high-contrast
subjects, but note that choosing a value
higher than required may not produce the
desired results; if Auto is selected, the
camera will automatically adjust exposure to suit the scene.
To Next Page
Loading...
