EasyManua.ls Logo

Nikon ED 17-55mm f/2.8G IF User Manual

Nikon ED 17-55mm f/2.8G IF
85 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
JAA78851-R.3617.A
作成承認印
配布許可印
NIKON CORPORATION
Tokyo, Japan
Recycled paper
Printed in Japan March 2004
Copyright 2004 by Nikon Corporation.
All Rights Reserved.
REPAIR MANUAL
AF-S DX Zoom-Nikkor
ED 17-55mm f/2.8G IF
JAA78851
INC

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Nikon ED 17-55mm f/2.8G IF and is the answer not in the manual?

Nikon ED 17-55mm f/2.8G IF Specifications

General IconGeneral
Focal Length17-55mm
Maximum Aperturef/2.8
Minimum Focus Distance0.36 m (1.2 ft)
Filter Size77mm
Weight755 g (26.6 oz)
Angle of View79° - 28°50'
Diaphragm Blades9 (rounded)
Format CompatibilityDX
AutofocusYes
Internal FocusingYes
Lens Construction14 elements in 10 groups
Dimensions85.5 x 110.5 mm
Lens MountNikon F
Maximum Reproduction Ratio1/5

Summary

REPAIR MANUAL

SPECIFICATIONS

PREPARATION FOR DISASSEMBLY AND ADJUSTMENT

DISASSEMBLY

FILTER RING AND 1ST LENS GROUP

Steps for removing the filter ring and the first lens group.

2ND LENS GROUP

Procedure for disassembling the second lens group.

REAR COVER RING AND BAYONET MOUNT

Steps for removing the rear cover ring and bayonet mount.

4TH LENS GROUP AND INDEX RING

Disassembly steps for the fourth lens group and index ring.

ASSEMBLY

MR HEAD AND ENCODER ASSEMBLY

Steps for assembling MR head and distance encoder.

MOTOR AND SWM UNIT ASSEMBLY

Procedures for assembling magnetic tape unit and SWM unit.

LENS BARREL AND RING ASSEMBLY

Steps for assembling lens groups, housing, rings, and tubes.

ELECTRONIC AND CONTROL COMPONENTS

Steps for assembling focus ring, PCB, switches, and zoom components.

ADJUSTMENT AND INSPECTION PROCEDURES

APERTURE DIAMETER ADJUSTMENT

Procedure for adjusting the aperture diameter.

FOCUS MOVEMENT AND BACK FOCUS ADJUSTMENT

Adjustments for focus movement and back focus.

1ST LENS GROUP ALIGNMENT

Procedure for aligning the first lens group.

4TH LENS GROUP ALIGNMENT

Procedure for aligning the fourth lens group.

SPECIAL PROCEDURES AND TOOLS

TOOL CREATION GUIDELINES

Instructions for creating positioning tools.

INSPECTION PREPARATION AND CONFIGURATION

Preparation for inspection, system configuration, and software overview.

MR DUTY AND MOTOR CONTROL ADJUSTMENT

Procedures for adjusting MR duty and motor control.

ABERRATION COMPENSATION DATA WRITING

Procedure for writing aberration compensation data.

Related product manuals