Nikon F3 - Sync Terminal; Viewfinder Illuminator

-CONTROLS IN DETAIL-continued----------
30
Sync terminal @
A separate sync terminal with a protective screw-in cover
is provided on the Nikon F3. It accepts all standard plug-
in PC cords, plus it is threaded for use with a Nikon
screw-in
PC cord. When using flash bulbs or an elec-
tronic flash without a hot shoe, it is necessary to use the
sync terminal. Use the following table to determine the
correct synchronization speed to set on the camera.
sn1.lUer.poeo!(I(lK,j
I/lOOO 1I10Cl0 11 500 Inso 11 125 ( / 60 JJO 115 I B I" 12
SpeedIlQh t
c:: MF
c:::::J Synchrorrized
c:::::J Cannot be used
8 X(II80 B
Viewfinder illuminator @
A convenient built-in viewfinder illuminator lets you see
the liquid crystal display shutter speed, including the
aperture, even in dim light. While the LCD is displayed
in the finder, push the illuminator button @ .
Note : The po wer switch mu st be turned on and the shutter button must
be depressed halfway prior to using the illuminator. Otherwise, it will
not light up.