Exposure metering: TTL centre-weighted (60/40) full-aperture exposure metering system using a
pair of silicon photodiodes (SPDs) and metering monolithic IC circuit.
Metering range: EV 1 to EV 18 (at ISO 100 with f/1.4 lens).
Film sensitivity range: ISO 12 to 6400
Power source: Choice of one 3V lithium battery CR-1/3N type, two 1.55V silver-oxide
batteries SR-44 type, or two 1.5V alkaline batteries LR-44 type; optional
Anti-Cold Battery Holder DB-2 accepts two AA alkaline, Ni-Cd or manganese
batteries. Note: for Nikon products using AA batteries, do not use lithiums
unless specifically stated.
Battery power check: LED exposure display inside viewfinder lights up when exposure meter is
switched on if there is sufficient power (ie, shutter speed dial is set anywhere
except B).
Camera back: Hinged; pops open when the film rewind knob is pulled up as the camera back
lock is pushed; interchangeable with Data Back MF-16; memo holder
provided.
Body finish: Chrome and black.
Body dimensions: 142.5 x 90 x 60mm approx. (W x H x D):
Body weight: 540g approx.
To Previous Page
Loading...
Need help?
General
