EasyManua.ls Logo

Nikon FM2 - Nikon Fm2 N Specifications

Nikon FM2
173 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Nikon FM2n Specifications
Type of camera: 35mm single-lens reflex
Picture format: 24mm x 36mm standard 35mm film format.
Lens mount: Nikon F mount; meter coupling lever provided; meter coupling lever release
button not provided.
Lenses: Lenses with Nikon F mount (with some limitations); AF lenses.
Shutter: Vertical-travel, metal focal-plane mechanical shutter with aluminium alloy
curtains.
Shutter release button: Mechanical; centre-threaded shutter release button accepts standard cable
release such as the Nikon AR-3; button locked when film advance lever is
flush with the camera body.
Shutter speed settings: 1/4000 sec to 1 sec, B bulb; 14 discreet settings in all.
Exposure meter switch: Light pressure on shutter release button switches meter on; meter stays on for
approx 30 sec after finger is removed from button, then automatically switches
off; meter automatically turned off when shutter speed dial is set to B.
Film advance lever: Single stroke type; 30 degrees stand-off angle and 135 degrees winding angle.
Self-timer: Set/cancel mechanical type provided; approx 10 sec shutter release delay.
Viewfinder: Eye level pentaprism type; 0.86 x magnification (with 50mm lens set at
infinity); finder coverage approx 93% of picture field.
Viewfinder display: Shutter speed, aperture direct readout (ADR) f/number in use, and five
different LED exposure displays using +, o and - signs.
Focusing screen: Split-image microprism Type K2 provided as standard; interchangeable with
matte Type B2 and matte with horizontal and vertical line etchings Type E2.
Reflex mirror: Automatic quick return type incorporating special control gear and
wheel-and-brake mechanism for reduced vibration and noise; non-lockable
type.
Depth-of-field preview: Via lever.
Motor drive coupling: Electrical contact and coupler built-in for operation with MD-12 Motor Drive,
which is operable when film advance lever is flush with body.
Multiple exposure lever: Provided; disengages frame counter for correct count.
Frame counter: Additive type (S..1-36); automatically resets to S when camera back is opened.
Film rewind: By crank provided after film rewind button is pressed.
Accessory shoe: Standard ISO type; ready-light contact provided.
Flash synchronisation: Built-in ISO-type hotshoe; threaded sync cord terminal provided for
off-camera or multiple-flash synchronisation with electronic flash units at all
speeds up to 1/250 sec.
Ready-light: LED visible inside viewfinder lights up when Nikon dedicated Speedlight is
fully charged; blinks to warn that the shutter speed set is beyond the sync
range of the electronic flash.
Nikon FM2 Specifications
file:///E|/Camera Repair Files/Nikon FM2 Specifications.htm (1 of 2) [12/11/2002 7:47:32 PM]

Table of Contents

Other manuals for Nikon FM2

Related product manuals