Removing the Film
At the end of the film
roll,
the frame counter will cease to advance. Rewind the
film by pushing the film rewind switch in the direction of arrow.(Fig. J) When
rewinding is complete and the motor has stopped, open the back cover and
remove the film cartridge from the chamber. The film rewind switch will return
to its original position automatically.
Trouble Shooting Guide
[Description] [Solution]
Subject out of focus If the subject is not located in the center of the view-
finder, use prefocusing. See Section 7-3.
Subjects must be 1.2m or more from the camera.
Review Sections 6, 7-3, 7-4.
Flash fails to function Replace the battery.
—10—
To Next Page
Loading...
