21
Simultaneous and Time Lag Shooting Accessories
MC-4 Remote Cord
With plus and minus banana plugs, the MC-4 Cord
can be used to fire up to three motor-driven F3s
simultaneously. Follow the diagram for proper
connection.
Note: For proper operation, the common electNcal leads (indicated
by bold lines in the diagram) should be kept as short as possib/
e.
MT-1 Intervalometer and MC-5 Connecting Cord
Provides time lag shooting with the F3.
Time-lapse exposures
You can trigger the motor drive for time-lapse
exposures by connecting an intervalometer or simi-
lar device to the trigger circuit in place of the
ON/OFF switch. In this case, there will be a
slight time delay between the moment the trigger
circuit is closed and the shutter is released.
Delay time
Mirror locked-up—30 milliseconds
Mirror operating—40 milliseconds
ACCESSORIES continued
To Next Page
Loading...
