Nikon Retinomax K-plus 2 - User Manual

Explains the meaning and use of caution symbols within the manual for user safety.

Details the various symbols found on the instrument's cover and nameplate and their meanings.

Specifies the authorized uses of the Auto Refract-keratometer Retinomax K-plus 2.

Warns against disassembling the instrument to prevent electric shock and malfunction.

Details safe practices for installing and transporting the instrument to prevent injury or damage.

Provides detailed instructions and safety precautions for handling and using the battery pack.

Guides the user through connecting the station, installing the battery, and initial charging.

Covers initial charging, notes, error procedures, and battery replacement for the measuring unit and printer.

Illustrates and describes the measurement screen display and its various indicators.

Details the Auto, Continuous, and Quick measurement modes and their R-K mode configurations.

Details the steps and procedures for performing measurements using the automatic mode.

Explains how to perform continuous measurements, storing multiple results per eye.

Describes the Quick mode for shortened refractometry times, useful for restless patients.

Covers the procedure for printing measured data, including eye prints and troubleshooting connection issues.

Addresses causes and solutions for unstable measurement results in refractometry, and issues with lenses.

Details the SETUP screen for configuring measurement mode, astigmatism, VD, and buzzer settings.

Addresses common symptoms and solutions for problems with the measuring unit's power, battery, and measurement functions.

Lists symptoms and solutions for various printer problems, including power, paper, printing, and data transfer.