Chapter 8 Functions and Operations of the Devices
101
Screw holes for attaching optional devices
The base’s top board has screw holes for attaching various
types of devices. Screw holes
(2) to (5) are not penetrating
to prevent ingress of solution into the base.
(1) 2-M4: Positioned under the stage plate attachment
section of the base. Usable for multiple
purposes.
(2) 4-M6: Positioned under the stage plate attachment
section of the base, Used for attaching the
P-SXY64 XY Stage.
(3) 2-M5: Positioned at the center on the top surface of
the base. Usable for multiple purposes.
(4) 4-M4: Positioned at the center on the top surface of
the base. Usable for multiple purposes.
(5) 4-M5: Positioned at the rear on the top surface of the
base. Used for attaching a device such as the
C-FDF Flexible Double Arm Fiber Illumination
Unit.
Screw holes for attaching optional devices
5.2
P2-DBL LED Diascopic Illumination Base
See “8.1 P2-DBL LED Diascopic Illumination Base” in this chapter.
5.3
P2-DBF Fiber Diascopic Illumination Base
See “8.2 P2-DBF Fiber Diascopic Illumination Base” in this chapter.
(1)
2-M4
(5)
4-M5
Depth 7
(3)
2-M5
Depth 7
(4)
4-M4
Depth 6
(2)
4-M6
Depth 8
20 100 20
184
40 70 40
80
255
145
115
To Next Page
Loading...
