17
2
Halogen Illuminators
There are two illuminators available: the G-LS of 6V10W and the
C-DSLS of 6V20W.
Lamphouse
Lamp socket
(Removable
back and forth)
Plug
Mounting screw
PlugLamphouse Lamp socket
Filter cap
ø33 mm filter
attachable
Holder and Epi arm
mounting screw hole
IV
G-LS
Lamp Socket A (6V10W)
C-DSLS
Illuminator A (6V20W)
1
Lamp
• When replacing the lamp, wait approximately thirty minutes
after turning off the lamp, and make sure that the lamp and the
lamphouse have cooled sufficiently.
• To prevent electric shock and product damage, turn off the
power switch on the power supply before replacing the lamp.
WARNING
To Next Page
Loading...
