WARRANTY
NIKRO PDC4000 is warranted for 3 years from the date delivered to the original
end user and may not be assigned or transferred.
Parts, which become defective due to faulty workmanship or materials during
normal use in this period will be repaired or exchanged at no charge if returned
and approved by an authorized NIKRO service center. All replaced or repaired
parts shall only be warranted for the remainder of the original three year warranty
period.
After the expiration of the three year warranty, all warranties on this unit including
fitness for a proposed usage or purpose will become void.
The end user shall be responsible for freight charges incurred to deliver
warranted product to an approved NIKRO service center. NIKRO shall be
responsible for freight charges incurred in returning unit to customer, but not to
exceed the original freight charges to customer.
It shall be wholly NIKRO’s decision to repair, replace or refund the purchase
price of any such defective goods.
This warranty does not apply to normal wear and tear, neglect, misuse, abuse or
incorrect installation. If any other replacement parts, filters or attachments are
used other than original NIKRO parts, this warranty will become void.
NIKRO disclaims responsibility for loss of production, profits, goodwill or any
other costs that may indirectly occur due to the failure of this product.
H.E.P.A. FILTER STANDARDS AND CERTIFICATION
All NIKRO H.E.P.A. filters are manufactured and individually tested using the
MIL-STD 282 D.O.P. test, or the IEST-RP-CC-001.3 test method.
Each filter is tested and certified to have a minimum efficiency of 99.97% @ 0.3
micron particles. All filters are then individually labeled and registered by the
manufacturer.
All H.E.P.A. filters used in NIKRO equipment meet, and in most cases, exceed
the minimum standard of 99.97% efficiency @ 0.3 micron particles, and comply
with OSHA and EPA standards for cleaning the air of toxic and nuisance dust
such as mold, lead and asbestos.
To Next Page
Loading...