nilco RS 17 E - Appliance; Suction Hose; Unpacking

11
WARNING!
Never use a defective appliance.
WARNING!
Prior to assembly, make sure that the mains
plug is unplugged. If the mains plug is
plugged in, the appliance could accidentally
be switched on, resulting in injurie
s.
Keep the packaging material for storage and lat-
er transport (e.g. when moving or sending the appliance
for servicing).
NOTICE!
Unpack the appliance and check the contents for
completeness. (see page 8 “Scope of delivery”) If you
detect damage from transport, contact your retail dealer
immediately.
Mounting
● Insert the end of the suction hose from below into the
back of the canister.
● Put the device on your back.
● Snap the hip strap into place at the fastener and
adjust it according to your requirements.
● Adjust the shoulder strap until it fits your body. Do not
pull it too tight, the majority of the weight should be
resting on the hip strap.
Unpacking
Assembly
en
Suction hose
Appliance