Need help?Do you have a question about the Niles SPK-1 and is the answer not in the manual?
General| Type | Speaker Selector |
|---|---|
| Zones | 1 |
| Impedance Protection | Yes |
| Impedance | 4-16 Ohms |
| Number of Zones | 1 |
| Protection | Automatic impedance protection |
| Power Handling | 100 watts per channel |
The SPK-1 is activated by applying 12 volts DC to its control input connector.
The control output allows daisy-chaining multiple SPK-1 units for expanded switching.
The SPK-1 serves as a slave unit for the SAS-1 master unit for automatic switching.
Instructions for stripping wires, twisting ends, and inserting into binding posts securely.
Connect the 12V DC source to the 'CONTROL IN' connector, observing proper polarity.
Use the 'CONTROL OUT' connector to daisy-chain other Niles switching devices.
Handles up to 600 Watts per channel continuous (RMS).
Features five-way speaker wire binding posts for connections.
Requires 12 volts DC power, drawing 1 Amp (100 milliamps).
Physical dimensions are 6 13/16" W x 3 1/8" H x 5 5/16" D.
The unit weighs 1 1/2 pounds.
To Next Page
