Niles SVL-1 - Introduction

Introduction
The SVL-1 is a table top volume control for speakers. It con-
nects between the speaker-level output of an amplifier,
speaker selector, etc. and a pair of speakers.
A perfect application for the SVL-1 is adjusting the volume of
remotely located speakers. The SVL-1 adjusts the volume of
speakers connected to it by attenuating the amplifier signal.
Niles volume controls use autoformers instead of L-pads for the
volume controlling element. This assures minimal internal power
dissipation with virtually no power wasted as heat.
TABLE OF CONTENTS
Introduction 1
Features and 2
Benefits
Installation 4
Considerations
Installation 7
Operation 9
Specifications 10
S PEAKER -L EVEL V OLUME C ONTROL
SVL-1
Speaker Level
Volume Control
1
®