Nilfisk-Advance C 130.1 X-TRA - Operating your pressure washer; Connection of high pressure hose; Mounting of spray lance and Click & Clean nozzles

Nilfisk C 120.3 / C 125.3 / C 130.1
7
Original Instructions
3.5 Mounting of high pres-
sure hose
Attach the high pressure hose
(4) to the spray gun (7).
Detach the high pressure hose
by pressing the pawl (A).
4 Operating your pressure washer
4.1 Connection of high pres-
sure hose
1. Mount the high pressure
hose on the outlet (3).
6
7
4.2 Mounting of spray
lance and Click & Clean
nozzles
1. Push the spray lance (6) into
the spray gun (7) and screw
it on.
Note: The
spray lance (6)
has a built-in low
pressure nozzle that can be
used for fl ushing away dirt.
2. Attach the nozzle.
Warning: When
attaching the Click &
Clean nozzles, the
pawl on the side
of the spray lance
should come out again.
Note: The Tor-
nado
®
PR nozzle
and the foam
sprayer feature a swivel lock,
which must be positioned in the
hole in the Click & Clean spray
lance.
Press the pawl to detach the
Click & Clean nozzle.
