Nilfisk-ALTO ATTIX 40-0M PC TYPE 22 User Manual

9
english
ATTIX 40-0M PC TYPE 22
3.3 Insert the disposal bag
1. The mains plug should not
yet be inserted into a socket.
2. Open the retain-
ing clamps (A) and re-
move the upper section
of the vacuum cleaner.
3. Insert the disposal bag into
the dirt tank.
4. Check that the ventilation
holes (E) remain inside the
dirt tank.
5. Press the bush of the new
filter bag firmly on to the in-
let fitting.
6. Fold the top edge of the
disposal bag over the rim of
the dirt tank.
7. Attach the upper section of
the vacuum cleaner.
8. Close the retaining clamps
(A). Ensure that the retain-
ing clamps fit properly.
Before picking up dust with occupational exposure limit values:
1. Check that all the filters are present and properly fitted.
2. Do not use the cleaner with damaged or missing antistatic clamp.
Risk of explosion due to static discharge in explosive atmos-
pheres.
3. The hose diameter and the setting for the suction hose diameter
must be the same.
4. When the motor is running, hold the suction hose shut. For safety
reasons, an acoustic warning sounds if the air speed in the suc-
tion hose drops to below 20 m/s.
3
2
2
7
3
6
3
8
ø
ø
ø
ø
A
A
3
2
2
7
3
6
3
8
ø
ø
ø
ø
A
A
B

Nilfisk-ALTO ATTIX 40-0M PC TYPE 22 Specifications

General

Brand	Nilfisk-ALTO
Model	ATTIX 40-0M PC TYPE 22
Category	Yard Vacuum
Language	English