Nilfisk-ALTO C 100.1 User Manual

5
EN
3 Before you start using your
pressure washer
3.2 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter out sand, lime stone
and other impurities as these
will damage the pump valves.
Caution: Failure
to fi t the fi lter will
invalidate the
guarantee.

3.1 Mounting of gun and
nozzle holder
1. Push down the gun and
nozzle holder (12) on the
product.
3.3 Mounting of high pres-
sure hose on spray gun
1. Screw the high pressure
hose on to the spray gun.


Nilfisk-ALTO C 100.1 Specifications

General

Brand	Nilfisk-ALTO
Model	C 100.1
Category	Pressure Washer
Language	English