Nilfisk-ALTO C 100.2 User Manual

5
EN
3 Before you start using your
pressure washer
3.1 Mounting of wheels
(only models including
wheels)
1. Mount the wheels by press-
ing them into the cabinet.
3.2 Mounting of trolley
handle (models with
trolley handle)
1. Remove the label on top of
machine.
2. Place the trolley handle (12)
into the machine.
3. Secure the handle by tighte-
ning the 4 screws.
3.3 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter out sand, lime stone
and other impurities as these
will damage the pump valves.
Caution: Failure
to fi t the fi lter will
invalidate the
guarantee.


Nilfisk-ALTO C 100.2 Specifications

General

Brand	Nilfisk-ALTO
Model	C 100.2
Category	Pressure Washer
Language	English