7
EN
3.6 Mounting of high pres-
sure hose on spray gun
1. Screw the high pressure (4)
hose on to the spray gun (7).
3.4 Mounting of trolley
handle (models with trol-
ley handle)
1. Place the trolley handle on
the machine.
2. Secure the handle by mount-
ing the 2 screws.
3.5 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet fi lter (2a) must
always be fi tted in the water
inlet pipe to fi lter out sand, lime-
stone and other impurities as
these will damage the pump
valves.
Caution: Failure
to fi t the fi lter will
invalidate the
guarantee.
To Next Page
Loading...
Need help?
General
