10
5.2 Winding up of electric
cable and high pressure
hose
5 After using your pressure washer
To avoid accidents, the electric
cable and the high pressure
hose should always be winded
carefully up around the handle.
C 110.2 X-TRA: Wind up the
cable on the appropriate hook.
5.1 Storing the washer The machine should be sto-
red in a frost-free room!
Pump, hose and accessories
should always be emptied of
water prior to storing as follows:
1. Stop the machine (press the
start/stop switch “O” (1) and
detach water hose and ac-
cessory.
2. Restart the machine and
activate the trigger. Let the
machine run until no more
water runs through the spray
gun.
3. Stop the machine, unplug
and wind up hose and cable.
4. Place spray handle, nozzles
and other accessories in the
holders of the machine.
Should the machine by mistake
be frozen, it will be necessary
to check it for damage.
NEVER START-UP A FROZEN
MACHINE.
Frost damages are not
covered by the guarantee!
5.3 Storage of accessories The spray handle, lance and
nozzles can be stored on the
pressure washer.
To Next Page
Loading...
Need help?
General
