4
EN
ASSEMBLY AND SETTINGS
DOC E-BIKE X1 should reach you fully assembled, with the exclusion of the PEDALS, which are supplied
separately.
Nevertheless, some parts (such as the saddle and handlebar) may arrive disassembled, or in some way
require adjusting.
HANDLEBAR
The handlebar folds up to allow your DOC E-BIKE X1 to take up less
space. To use it, put it in a vertical position and lock it in place with
the stops provided.
CAUTION: ALWAYS CHECK
THAT IT IS PROPERLY
TIGHTENED.
PEDALS
The pedals will arrive disassembled and in a separate plastic bag.
Carefully screw the pedals into the dedicated seat and tighten with the
spanner supplied.
CAUTION: In order to avoid them coming loose during travel, the
pedals (of all bicycles) have the characteristic feature of having the
left pedal with opposite thread.
In practice, when you screw them in, you will
need to do so in the opposite direction, as
though you were unscrewing.
SADDLE
Insert the sleeve of the saddle in its housing and adjust the height, by turning the screws and quick-release
terminals.
To Next Page
Loading...
