Dear customer,
Congratulations on choosing a factory-assem-
bled model helicopter from our range. Many
thanks for placing your trust in us.
The model can be completed and prepared for
flight very quickly. Please read right through the-
se instructions before attempting to fly the model
for the first time, as this will make it much easier
to operate the model safely.
All directions, such as “right-hand”, are as seen
from the tail of the model, looking forward.
Specification:
Main rotor diameter: approx. 450 mm
Tail rotor diameter: approx. 120 mm
Length: approx. 456 mm
Height: approx. 170 mm
All-up weight: approx. 340 g
RC functions: Pitch-axis, roll, tail rotor,
collective pitch, throttle
Recommended accessories:
8 x 8005 NiMH AA-cell, 1.2 V / 2500 mAh
1 x F1415 Transmitter charge lead
1 x 8564 POWER PEAK
®
Uni 7 EQ 230V
Set contents:
1 x Scale helicopter, completely factory-assembled and set up, ready to fly
1 x Detailed, multi-colour scale fuselage with metal-reinforced tubular ladder
frame
1 x 3-blade rotor head
1 x Brushless motor
1 x LiPo battery, 11,1 V 1100 mAh
1 x Battery charger with plug-type mains PSU
1 x Triple-axis gyro system
1 x J6 2.4 GHz 6-channel computer radio control system, pre-programmed
1 x Operating instructions
Please be sure to observe the Safety Notes concerning
the handling of Lithium-Ion-Polymer batteries (page 11).
6
Operating Instructions - SOLO PRO 290 RTF 2.4 GHz No. NE2516
To Next Page
Loading...