Nine Eagles SOLO PRO 290 - Page 7

7
Hover throttle setting
Aerial
3D switch SW (B)
Throttle off switch SW (A)
Pitch-axis trim
Battery display
Stick
Pitch-axis / tail rotor
Tail rotor trim
Mode button
END button
LCD screen
Neckstrap
lug
Operating display
** After
changing mode
you must switch
the transmitter off
and then on again,
in order to activate
the new mode.
Gyro gain
switch
Trainer
Switches
Servo travel reduction
Throttle trim
Stick
Collective pitch / motor speed
and roll
On / Off switch
Roll trim
Push-button
Level select
Adjustment
Transmitter description* (Mode 1) - The mode select switch** is located on the back of the transmitter
(*Complete operating instructions for the J6 transmitter can be found in the Download area at www.robbe.com)
Charge socket
Operating Instructions - SOLO PRO 290 RTF 2.4 GHz No. NE2516