Hub motor
To accelerate and decelerate, check if
the hub motor is stalled or has
abnormal sounds.
Front wheel
maintenance
Check if the front wheel is stalled or gets
shaky, or the axis shaft is unbalanced.
Brake
adjustment
If the brake is too tight/loose, use the 4
mm Allen key to loosen the screw on the
caliper. Then slightly adjust the brake
line (decrease/increase the exposed
length), and tighten the screw again.
Test standard: the riding speed is 20
km/h (12.4 mph), and the braking
distance is within 6m
Drum brake
Front wheel can rotate normally without
abnormal sound. Front wheel can be
braked after squeezing the brake lever.
Taillight
Squeeze the brake lever, the tail light
works normally.
Headlight
Check the headlight and see if it lights
brightly.
Direction
indicators
Toggle the direction indicator button to
the left/right respectively, check if the
direction indicators on the left/right
side flash normally.
Dashboard
Power on the scooter, the dashboard
works properly.
Horn
Press the horn button and the sound is
loud.
Throttle
Press and hold the throttle then release
it, checking for acceleration and
deceleration.
Note: Release it, check if the throttle will
back to the position.
Item Component
Function
inspection
Maintenance Method
Every 6
months or
every 500
km (310
miles)
Every 1 year or
every 1000
km (621
miles)
Every 3 years
or
every 10,000
km (6,214
miles)
√ √√
√ √√
√ √√
√ √√
√ √√
√ √√
√ √√
√ √√
√ √
√ √
Every 3
months
To Next Page
Loading...
