Recommended Maintenance Schedule
5
To ensure safe riding, day to day care and regular maintenance are essential. You, the owner, have control and knowledge of
how often you use your scooter, how hard you use it and where you use it. It is the owner's responsibility to perform regular
checks and bring your scooter to authorized service center for inspection and service. Please refer to the maintenance
schedule below.
Note: This maintenance schedule charges a service fee.
Item Component
Mainframe parts
Use a soft, wet cloth to wipe the
mainframe clean.
Tire pressure
Inflate tires to 42-48 psi
Tire wear
Screws on the
stem top
Mainframe
maintenance
Screws on the
folding
mechanism
Check if the tires are cracked,
deformed, or significantly worn.
Tighten the screws fixed with the
handlebar and the stem. The suggested
torque is 5.5±0.5 N·m.
Tighten the screw on the throttle. The
suggested torque is 0.9±0.06 N·m.
Tighten the screws on the brake lever. The
suggested torque is 6±1 N·m.
Tighten the screws on the stem top. The
suggested torque is 8.5±0.5 N·m.
Tighten the fixing screws of the folding
handle and the front fork,
Two lateral screws at the side, the
recommended torque is 15 ± 1N · m
Fold and unfold, the upper vertical screw,
the recommended torque is 15 ± 1N · m
Fold the connecting rod, and fasten the
connecting rod screws when rocking on
the bike. The folding is smooth without
shaking.
Maintenance Method
Every 6
months or
every 500
km (310
miles)
Every 1 year or
every 1000
km (621
miles)
Every 3 years
or
every 10,000
km (6,214
miles)
√ √√
√√
√
√√
√
√√
√
√
√ √√√
√ √√√
Every 3
months
To Next Page
Loading...
