Need help?Do you have a question about the NINGBO DAVID HKN-9010 and is the answer not in the manual?
Provides an overview of the service manual's purpose and scope.
Details the features and capabilities of the Infant Radiant Warmer.
Identifies and illustrates the main physical components of the warmer.
Instructions for safely removing the Infant Radiant Warmer from its packaging.
Step-by-step guide for the physical assembly and setup of the warmer unit.
Verifies the stability and function of the unit's casters.
Tests the system's response to loss of main power supply.
Outlines the procedure for powering on and initializing the controller unit.
Verifies the proper operation of the warmer in different control modes.
Confirms the correct activation and indication of temperature setting alarms.
Tests the alarms that trigger when temperature deviates from the setpoint.
Verifies the function of the alarm for excessive temperature conditions.
Checks the functionality of the integrated APGAR timer feature.
Verifies the accuracy and setting of the unit's timer functions.
Confirms the proper operation of the bassinet's angle adjustment mechanism.
Tests the adjustability of the warmer module's angle.
Verifies the operation of the built-in illumination light.
Checks the security and integrity of the unit's panels.
Confirms the proper functioning and placement of the X-ray tray.
Verifies the stability and secure mounting of the I.V. pole.
Presents detailed technical specifications and performance parameters of the warmer.
Explains the fundamental operational mechanisms and control logic of the warmer.
Provides an introduction to the preventive maintenance procedures for the warmer.
Details the procedures for cleaning the Infant Radiant Warmer.
Outlines the methods and precautions for sterilizing the device.
Covers essential maintenance tasks including battery, heater, and sensor calibration.
Introduces the service procedures, including parts replacement and troubleshooting.
Guide on how to replace key components like battery, fuses, heater, and light.
Step-by-step instructions for configuring various system settings of the controller.
Procedure to adjust the brightness of the indicator lights on the controller.
Method to compensate for inaccuracies in baby temperature readings.
Setting procedure for identifying the specific machine number.
Setting the threshold for high temperature deviation alarms.
Setting the threshold for low temperature deviation alarms.
Defines the maximum allowable baby temperature setting.
Defines the minimum allowable baby temperature setting.
Setting the value for the over-temperature alarm threshold.
Detailed steps for accessing and modifying system settings via the controller interface.
Guides for diagnosing and resolving common issues with the Infant Radiant Warmer.
Introduction to troubleshooting guidelines and required test equipment.
Lists the necessary tools and devices for troubleshooting the controller.
Explains error codes and provides corrective actions for system failures.
Presents flowcharts to guide the diagnosis of specific alarm conditions like Main ADC failure.
Provides an overview of the replacement parts catalog for the warmer.
Introduces wiring diagrams, parts location diagrams, and controller schematics.
General| Brand | NINGBO DAVID |
|---|---|
| Model | HKN-9010 |
| Category | Medical Equipment |
| Language | English |
To Next Page