EasyManua.ls Logo

Ningbo Siterwell Electronics GS522C User Manual

Ningbo Siterwell Electronics GS522C
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Smoke A
larm User Manual
Model number: GS522C
Ref
Thank you for purchasing our smoke
alarm. Please take a
few minutes to read the user’s manual thoroughly and
familiarize yourself and your family with its operation. And
save it for future reference.
Diagram 1
Product Specifications:
POWER: built-in DC3V(Panasonic
CR
battery (battery not replaceable)
OPERATION CURRENT:<8uA
(standby)
(alarm)
ALARM VOLUME: >85 dB (A)
at 3 mete
ALARM SENSITIVITY: 1.9-
2.52%/ft OBS
SILENCE TIME: approx. 10 minutes
SMOKE ALARM SOUND PATTERN
BI 0.5s - pause 0.5s BI 0.5s
pause 0.5s
pause 1.5s, with the red LED flash, repeat this alarm
pattern.
COMPLY WITH: UL217 &CAN/
ULC
Description:
This unit is a photoelectric smoke alarm.
The
technology, it is more sensitive in
detecting slow smolder
fires which generate light smoke,
little heat and may smolder
for hours before bursting into flames. This
smoke alarm
not contain any radioactive material. Smoke
installed in every room (except the bathroom
finished attics and basements
, making sure the people in the
home will be able to hear and respond to the alarm sound.
For minimum protection, you should
install
every level of t
he home particularly outside sleeping rooms
Each alarm should
be placed in the middle of the ceiling of
each room to be protected.
Typical single storey dwelling
installation recommendations:
Install a smoke alarm on the
ceiling or wall inside each bedro
om and in the hallway
Document NO.:RD-522D-39-001
- 1 -
larm User Manual
Ref
ST522C
alarm. Please take a
few minutes to read the users manual thoroughly and
familiarize yourself and your family with its operation. And
CR
-2/3AZ) Lithium
(standby)
, <70mA
at 3 mete
rs.
2.52%/ft OBS
SMOKE ALARM SOUND PATTERN
: Temporal 3
pause 0.5s
BI 0.5s
pause 1.5s, with the red LED flash, repeat this alarm
ULC
-S531
The
photoelectric
detecting slow smolder
ing
little heat and may smolder
smoke alarm
does
alarms should be
installed in every room (except the bathroom
and kitchen),
, making sure the people in the
home will be able to hear and respond to the alarm sound.
install
an alarm on
he home particularly outside sleeping rooms
.
be placed in the middle of the ceiling of
Typical single storey dwelling
Install a smoke alarm on the
om and in the hallway
outside each separate sleeping area. If a bedroom area
hallway is more than 30 feet long, install a smoke alarm at
each end. If there is a basement: install a smoke alarm on the
basement ceiling
at the bottom of the stairwell
multi-storey dwelling
installation recommendations:
minimum of one smoke alarm on each
home.
Install a smoke alarm on the ceiling
each bedroom and in the hallway outside each separate
sleeping area. If a bedroom area hallway is more than 30 feet
long, install a smoke alarm at each end install a smoke alarm
at the top of a first – to-
second floor stairwell.
Important Saf
ety Information:
1. T
he test button accurately tests smoke alarm functions. Do
not use any other test method. Test smoke alarm weekly to
ensure proper operation.
2.
If you're sure it isn't a really alarm, open windows or fan
the ai
r around smoke alarm
3.
User to install this product need
and national electrical installat
4.
This smoke alarm is designed to
family home
only. In multifamily buildings, each
individual living unit should have its own smoke alarms.
Do not install in non-
residential buildings
alarm is not a substitute for a complete alarm system.
5.
Install a smoke alarm in every room and on every
the home. Smoke may not reach the smoke alarm for many
reasons. For example, if a fire starts in a remote part of the
home, on another level, in a chimney, wall, roof, or on the
other side of a closed door, smoke may not reach the smoke
alarm in t
ime to alert household members. A smoke alarm
will not promptly detect a fire except in the area or room in
which it is installed.
6.
Smoke alarm may not alert every household member every
time. The alarm horn is loud in order to alert individuals to
a potent
ial danger. However, there may be some
circumstances where a household member may not hear the
alarm (i.e. outdoor or indoor noise, sound sleepers, drug or
alcohol usage, the hard of hearing, etc.). If you suspect that
this smoke alarm may not alert a hous
and maintain specialty smoke alarms. Household member
must hear the alarms warning sound and quickly respond
to it to reduce the risk of injury, or death that may result
from fire, i
f a household member is hard of hearing, install
special smoke alarms
with lights or vibrating devices to
alert occupants.
7.
Smoke alarms can only sound their alarms when they
detect smoke or detect combustion particles in the air. They
Version: B Date :20160909
outside each separate sleeping area. If a bedroom area
hallway is more than 30 feet long, install a smoke alarm at
each end. If there is a basement: install a smoke alarm on the
at the bottom of the stairwell
. Typical
installation recommendations:
Install a
minimum of one smoke alarm on each
occupiable level of the
Install a smoke alarm on the ceiling
or wall inside
each bedroom and in the hallway outside each separate
sleeping area. If a bedroom area hallway is more than 30 feet
long, install a smoke alarm at each end install a smoke alarm
second floor stairwell.
ety Information:
he test button accurately tests smoke alarm functions. Do
not use any other test method. Test smoke alarm weekly to
If you're sure it isn't a really alarm, open windows or fan
r around smoke alarm
to test and silence it.
User to install this product need
s to comply with all local
and national electrical installat
ion and building codes.
This smoke alarm is designed to
be used inside a single
only. In multifamily buildings, each
individual living unit should have its own smoke alarms.
residential buildings
as this smoke
alarm is not a substitute for a complete alarm system.
Install a smoke alarm in every room and on every
level of
the home. Smoke may not reach the smoke alarm for many
reasons. For example, if a fire starts in a remote part of the
home, on another level, in a chimney, wall, roof, or on the
other side of a closed door, smoke may not reach the smoke
ime to alert household members. A smoke alarm
will not promptly detect a fire except in the area or room in
Smoke alarm may not alert every household member every
time. The alarm horn is loud in order to alert individuals to
ial danger. However, there may be some
circumstances where a household member may not hear the
alarm (i.e. outdoor or indoor noise, sound sleepers, drug or
alcohol usage, the hard of hearing, etc.). If you suspect that
this smoke alarm may not alert a hous
ehold member, install
and maintain specialty smoke alarms. Household member
must hear the alarms warning sound and quickly respond
to it to reduce the risk of injury, or death that may result
f a household member is hard of hearing, install
with lights or vibrating devices to
Smoke alarms can only sound their alarms when they
detect smoke or detect combustion particles in the air. They

Questions and Answers:

Ningbo Siterwell Electronics GS522C Specifications

General IconGeneral
BrandNingbo Siterwell Electronics
ModelGS522C
CategorySmoke Alarm
LanguageEnglish

Summary

Product Specifications

Important Safety Information

LED Indicators

Alarm Condition

Red LED flashes rapidly (one flash per second) during alarm.

Low Battery Trouble Indication

Intermittent chirp and red LED flash every 40 seconds.

Operation

Testing

Test the unit weekly by pressing the test button.

What to Do When the Alarm Sounds

Repair and Troubleshooting

Escape Plan and Alarm Locations

Develop and Practice a Plan of Escape

Install extinguishers, create floor plans, and conduct drills.

Installation