Page 10
Espresso capsule coffee maker
• This machine must never be used by children, invalids, etc. except under strict
supervision, nor in any case by people that have not been properly instructed
about how to use it and about the dangers of improper use.
• Do not use the machine with bare feet and wet hands.
• Always unplug the power plug before cleaning the machine and before doing
any kind of work on it.
USER SAFETY: UNPACKING AND PLACEMENT
• Remove the machine from its packing and check that all the parts are there and
are not broken.
• Place the machine on a at, even, stable, heat-resistant surface, strong enough
to bear its weight.
• Do not install or use the machine near curtains or other ammable material and
do not place anything on top of it during use.
• Do not place the machine on top of, or close to, additional oven or other
equipment that generates heat (for instance, radiators, etc.)
• Make sure there is enough space around the machine for proper
ventilation.
PACKAGING MATERIALS (CARDBOARD, CELLOPHANE, METAL
STAPLES, ETC.) COULD CUT OR CAUSE INJURY IF NOT HANDLED
CAREFULLY OR IF USED INCORRECTLY. KEEP THEM OUT OF THE
REACH OF CHILDREN OR UNSKILLED PERSONS.
HOW TO USE THE MACHINE
This machine is designed for making coffee/ hot water, solely for household use.
It must not be used for other purposes and must not be altered or tampered with for
any reason.
Use for any other purpose is considered improper and therefore dangerous.
The manufacturer cannot be held responsible for any damages resulting from
improper erroneous or unreasonable use.
• Do not touch the hot parts (coffee nozzle) during using the machine.
• While brewing coffee/ hot water beware of possible splashes of hot coffee/water.
• Do not open main lever while brewing coffee/ hot water.
REGULATIONS
The manufacturer states that the product referred to in this booklet was manufactured
in compliance with the Community Directives as shown in the declaration of conform-
ity attached to this booklet.
PREPARING THE MACHINE
WATER FILLING
Remove the water tank and pour cold water into the tank (maximum 600 ml),
then close the water tank cover (Fig.3 and Fig.4).
PREPARE FOR BREWING
Adjust the cup tray and put the cup on the cup tray (Fig. 5A and Fig. 5B)
Connect the machine to the electricity by inserting the plug (Fig. 6) in the socket.
To Next Page
Loading...