Text
While power is on, press and hold Front Light button to turn on or off headlight.
Press the power button for [7] seconds to turn on/off the scooter. then use NFC card to active it The scooter turns off
automatically if not used for 90 seconds
While stationary, and with the power on, press the [5] & [6] button to cycle through the three different speed levels 1
to 3.Use the throttle to control the speed within each speed level.
While stationary, and with the power on, press and release the [7] button to cycle through the following data: ODO
(lifetime mileage),TRIP mileage, VOLTAGE level, ELECTRICAL CURRENT level and ERROR CODE.
While at maximum speed, press the Turbo / NOz [11] button to get a short boost while riding
Vsett display operation and programming
Vsett display operation and programming
To Next Page
Loading...
