ENGLISH
43 44ninjakitchen.eu
REHEAT
1 Ensure the crisper plate is in the pan.
2 Press the Reheat button. The default
temperature setting will display. Press
the TEMP up and down arrow buttons
to set your desired temperature.
3 Press the TIME up and down arrow
buttons to set the reheating time.
4 Add ingredients to the pan. Insert the
pan in the unit.
5 Press START/STOP to begin reheating.
6 When reheating is complete, the unit
will beep and End will appear on the
control panel display.
7 Remove ingredients by tipping
them out or by using oven gloves
or silicone-tipped tongs/utensils.
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
DEHYDRATE
1 Place your first layer of ingredients in
the bottom of the pan. Then install the
crisper plate inside the pan and set
a second layer of ingredients on the
crisper plate.
2 Insert the pan in the unit.
3 Press the Dehydrate button.
The default temperature will
display. Use the TEMP up and
down arrow buttons to set your
desired temperature.
NOTE: You can increase your dehydrating
capacity with the mid-level rack. If the
rack is not included with your model, it is
available for purchase at ninjakitchen.eu.
4 Press the TIME up and down
arrow buttons to set your desired
dehydrating time.
5 Press START/STOP to start
dehydrating.
6 When dehydrating is complete,
the unit will beep and End will
appear on the control panel display.
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
AIR FRYMAX CRISP ROAST
USING THE COOKING FUNCTIONS – CONT
To Next Page
Loading...
