6
ninjakitchen.com
7ninjakitchen.com
PARTS
D
BEFORE FIRST USE
A Cleaning Brush
B Tamper
C Food Tray
D Feed Chute Chamber
with Anti-Drip Lever
E Auger
F Black Filter (no pulp)
G Gray Filter (some pulp)
H Orange Filter (lots of pulp)
I Inner Pulp Spout
J Outer Pulp Spout
K Juice Jug
L Pulp Container
M Motor Base (power cord not shown)
To purchase more accessories and find
great recipes, visit ninjakitchen.com.
B
A
C
E
G
H
L
K
M
I
1 Remove all packaging materials from
the unit.
2 Wash parts in warm, soapy, water, then
thoroughly rinse and air-dry all parts.
3 Wipe control panel with a soft cloth. Allow
it to dry completely before using.
IMPORTANT: Review all warnings on
pages 4–5 before proceeding.
NOTE: All attachments are BPA free
and dishwasher safe.
FEATURES
USING THE CONTROL PANEL
USING THE FILTERS FOR PULP CONTROL
START/STOP
Press once to start continuous running up to 12 minutes; press again to stop.
REVERSE
If the feed chute chamber becomes blocked or ingredients are not
processing, press and hold REVERSE. There will be a beep and a brief
pause, then the auger will rotate in the opposite direction. Release
REVERSE to stop. Repeat as needed. Press START/STOP to resume
normal operation.
LOTS OF PULP
Use the
orange filter
with the
largest mesh
for juice
with lots
of pulp.
SOME PULP
Use the gray
filter with the
larger mesh
for juice with
some pulp.
Control the amount of pulp by choosing the desired filter.
NO PULP
Use the black
filter with the
finest mesh
for juice with
no pulp.
F
J
NOTE: For best results, we recommend using the Gray (Some Pulp) or Orange (Lots of
Pulp) filter when processing soft fibrous fruits like berries, seeded melons, and pineapple.
To Next Page
Loading...
Need help?
General
