Ninja CT670UKV User Manual

28 29
ninjakitchen.eu
USING YOUR
SLICING/SHREDDING DISC
IMPORTANT: Review all warnings
on pages 2-5 before proceeding.
IMPORTANT: Only use LOW when
using the Slicing/Shredding Disc.
5 Use the finger holes to grasp the
disc and place it over the spindle.
4
Place the spindle inside the bowl. 6 Place the feed chute lid on the
bowl and turn clockwise until you
hear a click, indicating the lid is
locked in place.
7
Press the power button and select
LOW on the control panel. The disc
will being spinning.
NOTE: The feed chute lid features
a two-part pusher to guide food
through the chute. Use the full pusher
for larger items such as cucumbers.
Twist and pull to remove the smaller
pusher and use the narrow chute for
smaller items such as carrots.
NOTE: The Slicing/Shredding Disc
is reversible. Use the side labelled
“Slicer” for Slicing. Carefully flip
the disc over to the side labelled
“Shredder” for shredding.
3 Secure the bowl onto the motor
base. Rotate Precision Processor
™
bowl clockwise until it clicks into
place.
1
Place the unplugged motor base
on a clean, dry, and level surface
such as a worktop or table. Press
downward on the motor base to
adhere the suction cups to the
work surface. Plug the motor base
into a socket.
2
Lower the Precision Processor bowl
onto the motor base. Align the bowl
so the handle is to the right, in a
diamond position.

Ninja CT670UKV Specifications

General

Brand	Ninja
Model	CT670UKV
Category	Food Processor
Language	English