14 15ninjakitchen.com
ninjakitchen.com
USING YOUR AIR FRYER MAX XL – CONT. CLEANING & MAINTENANCE
Cleaning Your Air Fryer Max XL
The unit should be cleaned thoroughly
after every use.
• Unplug the unit from the wall outlet
before cleaning.
NOTE: NEVER immerse the main unit in
water or any other liquid. NEVER clean
the main unit in a dishwasher.
• To clean the main unit and the control
panel, wipe them clean with a damp cloth.
• The basket, crisper plate, and any
accessories can be washed in the
dishwasher.
• If food residue is stuck on the crisper
plate or basket, place them in a sink
filled with warm, soapy water and allow
to soak.
• Air-dry or towel-dry all parts after use.
HELPFUL TIPS
1 For consistent browning, make sure
ingredients are arranged in an even
layer on the bottom of the basket
with no overlapping. If ingredients are
overlapping, make sure to shake them
halfway through the set cook time.
2 Cook time and temperature can be
adjusted at any time during cooking.
Simply press the up and down TIME
or TEMP arrows to adjust the time or
temperature.
3 To convert recipes from a conventional
oven, reduce the temperature of the air
fryer by 25°F. Check food frequently to
avoid overcooking.
4 We recommend 3 minutes of preheating.
You can use the built-in timer to set a
3-minute countdown.
5 Occasionally, the fan from the air fryer
will blow lightweight foods around.
To alleviate this, secure foods (like
the top slice of bread on a sandwich)
with toothpicks.
6 The crisper plate elevates ingredients
in the basket so air can circulate under
and around them for consistent,
crisp results.
7 After a cooking function is selected, you
can press the START/STOP button to
begin cooking immediately. The unit will
run at the default temperature and time.
8 For best results, remove food
immediately after the cook time is
complete to avoid overcooking.
9 For best results with fresh vegetables
and potatoes, use at least 1 tablespoon
of oil. Add more oil as desired to achieve
the preferred level of crispiness.
10 For best results, check progress
throughout cooking, and remove food
when desired level of brownness has
been achieved. We recommend using
an instant-read thermometer to monitor
internal temperature of proteins. After
the cook time is complete, remove food
immediately to avoid overcooking.
REPLACEMENT PARTS
To order additional parts and accessories, visit ninjaaccessories.com or contact Customer
Service at 1-877-646-5288.
Dehydrate
1 Place a layer of ingredients in the
bottom of the basket. Then install the
crisper plate in the basket and set a
second layer of ingredients on the
crisper plate.
2 Insert the basket in the unit.
3 Press the DEHYDRATE button. The
default temperature will display. Use the
TEMP up and down arrow buttons to set
your desired temperature.
NOTE: You can increase your air fryer’s
dehydrating capacity with the mid-level
rack. If the rack is not included with
your model, it is available for purchase
at ninjaaccessories.com
4 Press the TIME up and down arrow
buttons to set the dehydrating time.
5 Press START/STOP to start dehydrating.
6 When dehydrating is complete, the unit
will beep and END will appear on the
control panel display.
MAX CRISP AIR FRY
MAX CRISP AIR FRY
MAX CRISP AIR FRY
MAX CRISP AIR FRY
To Next Page
Loading...
Need help?
General
