Ninja NEVERCLOG JC150 Series

To Next Page

ninjakitchen.com

WARNING

To reduce the risk of injury, ﬁre, electrical shock, or property damage, basic safety precautions

must always be followed, including the following numbered warnings and subsequent

instructions. Do not use appliance for other than intended use.

1 Read all instructions prior to using the appliance and its accessories.

2 Carefully observe and follow all warnings and instructions. This unit contains electrical connections

and moving parts that potentially present risk to the user.

3 DO NOT submerge the motor base or control panel in water or other liquids.

4 DO NOT spray motor base or control panel with any liquid. Take inventory of all contents to ensure

you have all parts needed to properly and safely operate your appliance.

5 Always make sure pulp spout is securely in place before motor is turned on. DO NOT unfasten parts

while juicer is in operation.

6 Be sure to turn the appliance o after each use. Make sure the motor stops completely

before disassembling.

7 Turn the appliance OFF, then unplug the appliance from the outlet when not in use, before

assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and

pull from the outlet. NEVER unplug by grasping and pulling the ﬂexible cord.

8 Before use, wash all parts that may contact food. Follow washing instructions covered in this

instruction manual.

9 Before each use, inspect auger for damage. If auger is bent or damage is suspected, contact

SharkNinja to arrange for replacement.

10 DO NOT use this appliance outdoors. It is designed for indoor household use only.

11 This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric

shock, this plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse

the plug. If it still does not ﬁt, contact a qualiﬁed electrician. DO NOT modify the plug in any way.

12 DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions,

or is dropped or damaged in any manner. This appliance has no user-serviceable parts. If damaged,

contact SharkNinja for servicing.

13 This appliance has important markings on the plug blade. The entire supply cord is not suitable for

replacement. If damaged, please contact SharkNinja for service.

14 Extension cords should NOT be used with this appliance.

15 To protect against the risk of electric shock, DO NOT submerge the appliance or allow the power cord

to contact any form of liquid.

NEVERCLOG™ COLD PRESS JUICER

JC150 Series | Owner’s Guide

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY

Read and review instructions for operation and use.

Indicates the presence of a hazard that can cause personal injury, death, or substantial property damage if

the warning included with this symbol is ignored.

For indoor and household use only.

When using electrical appliances, basic safety precautions should always be followed, including the following:

ESPAÑOL FRANÇAIS ENGLISH

Main Page

Need help?

Do you have a question about the Ninja NEVERCLOG JC150 Series and is the answer not in the manual?

The Ninja NeverClog™ Cold Press Juicer (JC150 Series) is a household appliance designed for extracting juice from fruits and vegetables. It utilizes a cold press method to minimize heat and oxidation, aiming to preserve nutrients and flavor. The juicer is equipped with a range of features to enhance usability, control pulp levels, and ensure safe operation and easy maintenance.

Function Description:

The primary function of the Ninja NeverClog™ Cold Press Juicer is to extract juice from various fruits and vegetables. It operates by slowly pressing ingredients, which is a gentler method compared to high-speed centrifugal juicers. This cold press technology is intended to yield juice with a higher nutritional content and a longer shelf life. The juicer is designed to handle a variety of produce, from soft, fibrous fruits like pears and berries to harder vegetables. It includes two interchangeable filters that allow users to control the amount of pulp in their juice, catering to different preferences. The appliance also features a reverse function to clear blockages, ensuring continuous operation.

Important Technical Specifications:

Model Series: JC150 Series
Voltage: 120V~, 60Hz
Power: 150 Watts
Pulp Control: Two interchangeable filters (Black for less pulp, Orange for lots of pulp)
Safety Features: Overload protection system that temporarily disables the motor, interlock mechanism to ensure proper assembly, polarized plug for electrical safety.
Materials: All attachments are BPA-free and dishwasher safe (except motor base).
Cord: Not suitable for replacement; extension cords should not be used.

Usage Features:

The Ninja NeverClog™ Cold Press Juicer is designed for intuitive and safe operation.

Control Panel: Features a simple control panel with "START/STOP" and "HOLD TO REVERSE" buttons.
- START/STOP: Initiates continuous juicing for up to 12 minutes or stops the operation.
- HOLD TO REVERSE: Activates a reverse rotation of the auger to clear blockages, accompanied by a beep and a brief pause. Releasing the button stops the reverse action, and pressing START/STOP resumes normal operation.
Pulp Control Filters:
- Black Filter (Less Pulp): Features a finer mesh for juice with minimal pulp.
- Orange Filter (Lots of Pulp): Features a larger mesh for juice with more pulp. This filter is recommended for soft, fibrous fruits like pears, berries, seeded melons, and pineapple for best results.
Assembly: The juicer components, including the auger, chosen filter, pulp spout, and feed chute chamber, are designed for easy assembly. The feed chute chamber locks into place on the motor base with a counterclockwise twist.
Juicing Process: Users gradually add ingredients to the feed chute. The tamper can be used to push ingredients down. The anti-drip lever on the feed chute chamber allows for mess-free serving and can be closed after juicing is complete.
Disassembly: Pressing and holding the RELEASE button while turning the feed chute chamber clockwise allows for easy removal from the motor base. The pulp spout, filter, and auger can then be gently removed.
Overload Protection: The unit is equipped with a safety system that temporarily disables the motor if it becomes overloaded. After a 2-minute pause, the unit can be restarted by pressing START/STOP.
Ingredient Guidelines:
- DO NOT add frozen fruits, vegetables, or ice.
- DO NOT juice hot liquids or ingredients.
- Seeds and pits (e.g., from mangoes, plums, cherries) and tough skins (e.g., from oranges, lemons, limes) should be removed to prevent damage to the unit.
- The unit may produce a squeaking noise when processing fibrous ingredients like apples, celery, herbs, and leafy greens, which is considered normal.
- Expected yield is approximately 8 oz. of juice per 1 lb. of produce. Yield may vary based on ingredient seasonality and the filter used.

Maintenance Features:

The Ninja NeverClog™ Cold Press Juicer is designed for straightforward cleaning and storage.

Cleaning:
- Hand-Washing: All parts (except the motor base) should be separated, washed in warm, soapy water with a soft cloth, rinsed thoroughly, and air-dried.
- Dishwasher Safe: All parts, excluding the motor base, are top-rack dishwasher safe. However, they should NOT be cleaned with a heated dry cycle.
- Motor Base: The motor base should be unplugged before cleaning and wiped with a clean, damp cloth. It should never be submerged in water or other liquids, nor sprayed with liquid.
- Filters: Any pulp buildup on the metal portion of the filter can be removed using a cleaning utensil or toothpick before washing.
Storage:
- Cord Storage: The power cord can be wrapped with the hook-and-loop fastener located near the back of the motor base. The cord should NOT be wrapped around the bottom of the base.
- Unit Storage: When moving the unit, it should be lifted from the bottom of the motor base. For compact storage, the auger and filter can be assembled within the feed chute chamber with the pulp spout installed, and the juice jug can be placed into the pulp container.
Troubleshooting: The owner's guide provides solutions for common issues such as the REVERSE program not operating, the unit stopping and beeping due to overload, questions about juicing fruits with seeds/pits or frozen ingredients, squeaking noises during operation, and lower-than-expected juice yield.

The Ninja NeverClog™ Cold Press Juicer is a robust appliance with a 1-year limited warranty, covering defects in material and workmanship under normal household conditions. Replacement parts and accessories can be ordered from ninjaaccessories.com.