Please make sure to read the enclosed Ninja® Owner’s Guide prior to using your unit.
NUTRI-BLENDER PRO
QUICK ASSEMBLY
ASS EMBLY
NINJA® NUTRI-BLENDER PRO
Intelligent preset programs that combine unique blending and pausing patterns
that do the work for you. Once a preset program is selected, it will start immediately
and automatically stop when blending is complete. To stop blending before
the end of the program, press the currently active button again.
AUTO-IQ® PROGRAMS
LOAD IT UP
WARNING: Always unplug your blender base before cleaning.
Do not go past the MAX LIQUID line when
loading the cup.
Overfilling ingredients may harm the unit when
in use. If you feel resistance when attaching
the Pro Extractor Blades® Assembly to the cup,
remove some ingredients.
CRUSH: Turn ice, juices, and fruit into expertly
blended frozen drinks.
SMOOTHIE: Combine your favorite fresh or
frozen ingredients, liquids, and powders to
create smoothies and protein shakes.
MANUAL PROGRAMS
NOTE: Manual programs cannot be used in
conjunction with any Auto-iQ programs.
PULSE: Oers greater control of pulsing and
blending. Operates only when PULSE is pressed.
Use short presses for short pulses and long
presses for long pulses.
START/STOP: Press once to start continuous
running up to 60 seconds; press again to stop.
Can also be pressed to stop a running
Auto-iQ program.
WARNING: Handle the blade assembly with care when washing, as the blades are sharp.
Contact with the blades’ edges can result in laceration.
DISHWASHER: The containers, lids, and blade
assembly are all dishwasher safe. Ensure
the blade assembly is removed from the lid
container before placing in the dishwasher.
HAND-WASHING: Wash containers, lids, and
blade assembly in warm, soapy water. When
washing the blade assembly, use a dishwashing
utensil with a handle.
CLEANING
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
4.
If using an Auto-iQ®
program, select the
program that best suits
your desired output.
The preset feature
will automatically stop
at the end of the
program. To stop the
unit at any time, press
the currently active
program again.
3.
Turn the cup upside
down and install on the
motor base by aligning
the tabs on the cup
with the slots on the
base. Then, rotate cup
clockwise until it clicks.
Once locked in place,
the programs will
illuminate and the unit
will be ready for use.
2.
Place the Pro
Extractor Blades®
Assembly on the
top of the cup and
turn clockwise
to seal.
1.
Add ingredients to
the Single-Serve
Cup. DO NOT add
ingredients past the
MAX LIQUID line.
3 ninjakitchen.com2 ninjakitchen.com
To Next Page
Loading...
